|
Altronix Pace1PTM Ethernet over UTP/CAT5e Transceiver.
|
Item Number: Pace1PTM
|
|
The Pace1PTM is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via a single twisted pair (UTP) (when paired with Pace1PRM) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PTM will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) (when paired with Pace1PRM) or structured cable.
Applications:
- Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
- Extend Network link distance in an industrial environment over 610m.
- Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. With proper head end equipment.
- PoE (15W) IEEE 802.3af compliant or PoE+ (30W)
- IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair CAT5e or a single twisted pair UTP.
- Speed: 10/100BaseT, half/full duplex, auto negotiation.
- PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM.
- Throughput is rated to pass 100mbps of data.
- Distance: up to 152m @ 100mbps.
- Distance: up to 500m @ 100mbps.
- Green - PoE ON (by respective RJ45 jack).
- Yellow and Green LED IP Link status, 10/100Base-T/active.
- Operating Temperature:
- -4° F to 120.2° F (-20° C to +49° C).
- Storage Temperature:
- -22° to 158° F (-30° to +70° C).
- Relative humidity: 20 to 85%, non-condensing.
- Operating Altitude: - 1000 to 6,561.679 ft. (- 304.8 to 2000m).
- Auto detection and protection of legacy non-PoE cameras/devices.
|
Product Reviews
|
| | |
|
| |
| | |
|
|
|