|
Power Over Ethernet (POE)
13W POE adapter for conventional IP cameras. Use with NetWay1, NetWay8 or NetWay16 when camera needs external power.
|
NetWay3012 25W POE (power over ethernet) adapter for conventional IP PTZ cameras. Use with NetWay1, NetWay8 or NetWay16 when camera needs external power.
|
Altronix NetWay1 Midspan provide power for PoE compliant cameras. They are available with one port in a compact insulated case. Cameras may be located up to 100m (328 ft.) from the NetWay unit.
|
Altronix NetWay16M Managed Midspans provides up to 30W max power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m (328 ft.) from the NetWay unit.
|
The Altronix NetWay8M Managed Midspan provides up to 30W max. power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m (328 ft.) from the NetWay unit.
|
Altronix NetWayXT repeater modules interface with NetWay midspans to extend power and data an additional 100m (328 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement.
|
MSRP: $89.01
Your Price: Request Special Price below
The Axis T8123 High Power over Ethernet (High PoE) 30W midspans enable Axis network video products to receive data and power over the same Ethernet cable.
|
IPX 4 Port POE injector 802.3af Compliant. Compact and cost effective solution for remote Ethernet terminal.
|
The IPX-INJ-C is a 802.3af Compliant POE injector. The IPX-INJ-C delivers both data and electrical power to Ethernet-enabled devices using a single Ethernet cable.
|
The ProSafe FS108P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af
|
The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply power over ethernet power.
|
The Pelco POE20U560G Power over Ethernet (PoE) single port power injector is designed to meet the demanding data rate and power requirements of higher wattage IP cameras. The injector offers total output power of 19.6 W meeting the IEEE 802.3af standard.
|
Veracity Highwire PowerStar VHW-HWPS-B Fast Ethernet and PoE power over coax video cable. HIGHWIRE PowerStar lets you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable.
|
Veracity Highwire PowerStar VHW-HWPS-C Fast Ethernet and PoE power over coax video cable. HIGHWIRE PowerStar lets you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable.
| |
|
| | |
|
| |
| | |
|

|
|