|
Power Over Ethernet
13W POE adapter for conventional IP cameras. Use with NetWay1, NetWay8 or NetWay16 when camera needs external power.
|
NetWay3012 25W POE (power over ethernet) adapter for conventional IP PTZ cameras. Use with NetWay1, NetWay8 or NetWay16 when camera needs external power.
|
Altronix NetWay1 Midspan provide power for PoE compliant cameras. They are available with one port in a compact insulated case. Cameras may be located up to 100m (328 ft.) from the NetWay unit.
|
Altronix NetWay16M Managed Midspans provides up to 30W max power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m (328 ft.) from the NetWay unit.
|
The Altronix NetWay8M Managed Midspan provides up to 30W max. power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m (328 ft.) from the NetWay unit.
|
Altronix NetWayXT repeater modules interface with NetWay midspans to extend power and data an additional 100m (328 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement.
|
IPX 4 Port POE injector 802.3af Compliant. Compact and cost effective solution for remote Ethernet terminal.
|
The IPX-INJ-C is a 802.3af Compliant POE injector. The IPX-INJ-C delivers both data and electrical power to Ethernet-enabled devices using a single Ethernet cable.
|
The ProSafe FS108P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af
|
The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply power over ethernet power.
| | |
|
| | |
|
| |
| | |
|
|
|